Mobiistar prime x max
Brand và model
Information about the br&, mã sản phẩm and Mã Sản Phẩm alias (if any) of a specific device.
Bạn đang xem: Mobiistar prime x max
| Brand Brand name of the company that manufactures the device. | Mobiistar |
| Model Model name of the device. | Prime X Max |
Design
Information about the dimensions & weight of the device, shown in different measurement units. Body materials, available colors, certifications.
| Width Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation. | 76.8 milimet (millimeters)7.68 centimet (centimeters)0.252 ft (feet)3.024 in (inches) |
| Height Information about the height, i.e. the vertical side of the device when it is used in its standard orientation. | 154.5 milimet (millimeters)15.45 cm (centimeters)0.507 ft (feet)6.083 in (inches) |
| Thickness Information about the thickness/depth of the device in different measurement units. | 7.3 milimet (millimeters)0.73 cm (centimeters)0.024 ft (feet)0.287 in (inches) |
| Weight Information about the weight of the device in different measurement units. | 164 g (grams)0.36 lbs (pounds)5.78 oz (ounces) |
| Volume Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the khung of a rectangular parallelepiped. | 86.62 cm³ (cubic centimeters)5.26 in³ (cubic inches) |
| Colors Information about the colors, in which the device is available in the market. | Gold |
| Body materials Materials used in the fabrication of the device"s body toàn thân. | Aluminium alloy |
SIM card
The Subscriber Identity Module (SIM) is used in Smartphone devices for storing data authenticating the subscribers of sản phẩm điện thoại services.
| SIM card type Information about the type & kích thước (form factor) of the SIM thẻ used in the device. | Nano-SIM (4FF - fourth khung factor, since 2012, 12.30 x 8.80 x 0.67 mm) |
| Number of SIM cards Information about the number of SIM cards, supported by the device. | 2 |
Networks
A Smartphone (cellular) network is a radio system, which allows a large number of sản phẩm điện thoại devices khổng lồ communicate with each other.
| GSM GSM (Global System for sản phẩm điện thoại Communications) was developed khổng lồ replace the analog cellular network (1G), therefore it is referred khổng lồ as a 2G di động network. It has been improved with the addition of General Packet Radio Services (GPRS) và later via the Enhanced Data rates for GSM Evolution (EDGE) technology. | GSM 850 MHzGSM 900 MHzGSM 1800 MHzGSM 1900 MHz |
| W-CDMA W-CDMA (Wideband Code Division Multiple Access) is an air interface used by 3G Mobile networks. It is one of the three different UMTS interfaces together with the TD-SCDMA and the TD-CDMA. The standard provides faster data transfer speeds and allows more users to lớn connect lớn the network simultaneously. | W-CDMA 900 MHzW-CDMA 2100 MHz |
| LTE LTE is deemed lớn be the fourth generation (4G) of Smartphone communications công nghệ. It has been developed by the 3GPP based on the GSM/EDGE và UMTS/HSPA technologies in order lớn increase the tốc độ và capađô thị of wireless data networks. A further development of the công nghệ is called LTE Advanced. | LTE 800 MHzLTE 850 MHzLTE 900 MHzLTE 1800 MHzLTE 2100 MHzLTE 2600 MHz |
điện thoại network technologies and bandwidth
Communication between devices within điện thoại networks is realized via various generations of network technologies, which provide different bandwidth.
| sản phẩm điện thoại network technologies There are several network technologies that enhance the performance of Mobile networks mainly by increased data bandwidth. Information about the communication technologies supported by the device & their respective uplinks and downliên kết bandwidth. | UMTS (384 kbit/s )EDGE Class 12 (118.4 kbit/s , 192-296 kbit/s )GPRS Class 12 (32-48 kbit/s , 32-48 kbit/s )HSPA+ (HSUPA 11 Mbit/s , HSDPA 42 Mbit/s )LTE Cat 6 (51.0 Mbit/s , 301.5 Mbit/s ) |
Operating system
Operating system is the system software, which manages & controls the functioning of the hardware components of the device.
| Operating system (OS) Information about the operating system used by the device as well as its version. | Android 5.1 Lollipop |
System on Chip (SoC)
A system on a chip (SoC) includes into a single chip some of the main hardware components of the mobile device.
| SoC The SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning. | MediaTek Helio P10 (MT6755) |
| Process technology Information about the process giải pháp công nghệ used in manufacturing the chip. The value in nanometers represents half the distance between elements that trang điểm the CPU. | 28 nm (nanometers) |
| CPU CPU is the Central Processing Unit or the processor of a di động device. Its main function is lớn interpret and exeđáng yêu instructions contained in software applications. | 4x 2.0 GHz ARM Cortex-A53, 4x 1.2 GHz ARM Cortex-A53 |
| CPU bits The CPU bits are determined by the bit-form size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors. | 64 bit |
| Instruction set The instruction mix architecture (ISA) is a mix of commands used by the software to manage the CPU"s work. Information about the mix of instructions the processor can exeđáng yêu. | ARMv8-A |
| Level 1 cabịt memory (L1) The cađậy memory is used by the processor in order to shorten the time needed khổng lồ access data and instructions that a frequently used. The L1 (level 1) cabít memory has a small volume, but operates faster than the RAM và the rest cabịt memory levels. If the processor does not find the data needed in L1, it continues lớn look for it in the L2 cađậy memory. In some processors the search in L1 & L2 is simultaneous. | 256 KB + 256 KB (kilobytes) |
| Level 2 cabít memory (L2) The L2 (cấp độ 2) cađậy memory is slower than L1, but has a larger capacity, instead, which allows it lớn cabịt more data. Just like L1, it is much faster than the system memory (RAM). If the CPU does not find the data needed in L2, it proceeds to look for them in the L3 cađậy memory (if there is such) or in the RAM. | 2048 KB (kilobytes)2 MB (megabytes) |
| CPU cores A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core & so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel. | 8 |
| CPU frequency The frequency of the processor describes its clochồng rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz). | 2000 MHz (megahertz) |
| GPU GPU is a graphical processing unit, which handles computation for 2D/3 chiều graphics applications. In Smartphone devices GPU is usually utilized by games, UI, video playback, etc. GPU can also persize computation in applications traditionally handled by the CPU. | ARM Mali-T860 MP2 |
| GPU cores Similar to lớn the CPU, the GPU consists of processing units called cores. They handle the computation of graphics in various applications. | 2 |
| GPU frequency The frequency is the clock rate of the graphic processor (GPU), which is measured in Megahertz (MHz) or Gigahertz (GHz). | 700 MHz (megahertz) |
| RAM capacity RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted. | 3 GB (gigabytes) |
| RAM type Information about the type of RAM used by the device. | LPDDR3 |
| RAM channels Information about the number of RAM channels integrated in the SoC. More channels mean higher data transfer rates. | Single channel |
| RAM frequency RAM frequency relates directly to the rate of reading/writing from/in the RAM memory. | 933 MHz (megahertz) |
Storage
Every điện thoại device has a built-in storage (internal memory) with a fixed capacity.
| Storage Information about the capađô thị of the built-in storage of the device. Sometimes one và the same Model may is offered in variants with different internal storage capathành phố. | 32 GB (gigabytes) |
Memory cards
Memory cards are used in điện thoại devices for expanding their external storage capađô thị.
| Types The various types of memory cards are characterized by different sizes và capathành phố. Information about the supported types of memory cards. | microSDmicroSDHCmicroSDXC |
Display
The display of a thiết bị di động device is characterized by its giải pháp công nghệ, resolution, px mật độ trùng lặp từ khóa, diagonal length, color depth, etc.
| Type/technology One of the main characteristics of the display is its type/technology, on which depends its performance. | IPS |
| Diagonal size In mobile devices display form size is represented by the length of its diagonal measured in inches. | 5.5 in (inches)139.7 mm (millimeters)13.97 cm (centimeters) |
| Width Approximate width of the display | 2.7 in (inches)68.49 mm (millimeters)6.85 cm (centimeters) |
| Height Approximate height of the display | 4.79 in (inches)121.76 mm (millimeters)12.18 centimet (centimeters) |
| Aspect ratio The ratio between the long & the short side of the display | 1.778:116:9 |
| Resolution The display resolution shows the number of pixels on the horizontal & vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content. | 1080 x 19đôi mươi pixels |
| Pixel density Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the px density, the more detailed & clearer is the information displayed on the screen. | 401 ppi (pixels per inch)157 ppcm (pixels per centimeter) |
| Color depth The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display. | 24 bit16777216 colors |
| Display area The estimated percentage of the screen area from the device"s front area. | 70.51 % (percent) |
| Other features Information about other functions and features of the display. | CapacitiveMulti-touchScratch resistant |
| Dragontrail glass2.5 chiều curved glass screenFull Lamination TechnologyAnti-fingerprint coating |
Sensors
Different sensors measure different physical quantities and convert them inkhổng lồ signals recognizable by the Smartphone device.
| Sensors Sensors vary in type và purpose. They increase the overall functionality of the device, in which they are integrated. | ProximityLightAccelerometerCompassGyroscopeFingerprint |
Rear camera
The primary camera of the Smartphone device is usually placed on its baông xã và can be combined with one or more additional cameras.
| Sensor model Information about the manufacturer & model of the image sensor used by this camera of the device. | Sony IMX230 Exmor RS |
| Sensor type Information about the sensor type of the camera. Some of the most widely used types of image sensors on thiết bị di động devices are CMOS, BSI, ISOCELL, etc. | CMOS (complementary metal-oxide semiconductor) |
| Sensor size Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors và less px density tkết thúc to lớn provide better image unique despite the lower resolution. | 5.99 x 4.5 mm (millimeters)0.29 in (inches) |
| Pixel size Pixels are usually measured in microns (μm). Larger ones are capable of recording more light, hence, will offer better low light shooting & wider dynamic range compared khổng lồ the smaller pixels. On the other hand, smaller pixels allow for increasing the resolution while preserving the same sensor kích thước. | 1.12 µm (micrometers)0.001120 milimet (millimeters) |
| Crop factor Crop factor is the ratio of the dimensions of a full frame camera"s sensor (36 x 24 mm, which equals the frame kích thước of a 35 mm film) & the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) và the sensor in question. | 5.78 |
| Number of lenses Information about the number of lenses used by the optical system of the camera. | 6 |
| Flash type The rear cameras of điện thoại devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements. | Dual LED |
| Image resolution One of the main characteristics of the cameras is their image resolution. It states the number of pixels on the horizontal và vertical dimensions of the image, which can also be shown in megapixels that indicate the approximate number of pixels in millions. | 5344 x 4016 pixels21.46 MPhường. (megapixels) |
| Video resolution Information about the maximum resolution at which the rear camera can shoot videos. | 1920 x 1080 pixels2.07 MPhường (megapixels) |
| Video FPS Information about the maximum number of frames per second (fps) supported by the rear camera while recording video at the maximum resolution. Some of the main standard frame rates for recording & playing đoạn phim are 24 fps, 25 fps, 30 fps, 60 fps. | 30 fps (frames per second) |
| Features Information about additional software và hardware features of the rear camera which improve sầu its overall performance. | AutofocusContinuous shootingDigital zoomDigital image stabilizationGeotaggingPanoramaHDRTouch focusFace detectionWhite balance settingsISO settingsExposure compensationSelf-timerScene modeMacro modeRAWPhase detection autofocus (PDAF) |
Front camera
Modern smartphones have one or more front cameras & their positioning has led to various kiến thiết concepts – pop-up camera, rotating camera, notch, punch hole, under-display camera, etc.
| Sensor model Information about the manufacturer và model of the image sensor used by this camera of the device. | OmniVision OV8858 |
| Sensor type Information about the sensor type of the camera. Some of the most widely used types of image sensors on Mobile devices are CMOS, BSI, ISOCELL, etc. | CMOS BSI 2 (backside illumination 2) |
| Sensor size Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors & less pixel mật độ trùng lặp từ khóa tkết thúc to provide better image quality despite the lower resolution. | 3.68 x 2.77 milimet (millimeters)0.18 in (inches) |
| Pixel size Pixels are usually measured in microns (μm). Larger ones are capable of recording more light, hence, will offer better low light shooting and wider dynamic range compared khổng lồ the smaller pixels. On the other hvà, smaller pixels allow for increasing the resolution while preserving the same sensor size. | 1.127 µm (micrometers)0.001127 milimet (millimeters) |
| Crop factor Crop factor is the ratio of the dimensions of a full frame camera"s sensor (36 x 24 mm, which equals the frame form size of a 35 milimet film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the sensor in question. | 9.4 |
| Field of view In photography, the Field of view (FoV) depends not only on the focal length of the lens but also on the sensor size. It is derived from the lens"s angle of view và the sensor"s crop factor. The lens"s angle of view is a measure of the angle between the two farthest separated points within the frame measured diagonally. Simply put, this is how much of a scene in front of the camera will be captured by the camera"s sensor. | 88 ° (degrees) |
| Image resolution Information about the number of pixels on the horizontal and vertical dimensions of the photos taken by the front camera, indicated in megapixels as well. | 3264 x 2448 pixels7.99 MP (megapixels) |
| Video resolution Information about the maximum resolution of the videos shot by the front camera. | 1920 x 1080 pixels2.07 MPhường (megapixels) |
| Video FPS Digital cameras are able to shoot videos at different frames per second (fps). Some of the main standard frame rates for recording & playing đoạn phim are 24 fps, 25 fps, 30 fps, 60 fps. Information about the maximum possible fps for shooting videos at the maximum possible resolution. | 30 fps (frames per second) |
Audio
Information about the type of speakers và the audio technologies supported by the device.
| Speaker The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses. | LoudspeakerEarpiece |
Radio
The radio in a sản phẩm điện thoại device is a built-in FM radio receiver.
| Radio Information whether the device has an FM radio receiver or not. | Yes |
Tracking/Positioning
Information about the positioning và navigation technologies supported by the device.
| Tracking/Positioning The tracking/positioning service is provided by various satellite navigation systems, which traông chồng the autonomous geo-spatial positioning of the device that supports them. The most common satellite navigation systems are the GPS and the GLONASS. There are also non-satellite technologies for locating mobile devices such as the Enhanced Observed Time Difference, Enhanced 911, GSM Cell ID. | GPSA-GPS |
Wi-Fi
Wi-Fi is a giải pháp công nghệ that provides wireless data connections between various devices within a short range.
| Wi-Fi Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility to serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices khổng lồ communicate with each other without the need for wireless access point (WAP). | 802.11b (IEEE 802.11b-1999)802.11g (IEEE 802.11g-2003)802.11n (IEEE 802.11n-2009)Wi-Fi Hotspot |
Bluetooth
Bluetooth is a standard for secure wireless data transfer between different types of devices over short distances.
| Version The technology has several versions, which improve sầu the connection tốc độ, range, connectivity & discoverability of the devices. Information about the Bluetooth version of the device. | 4.0 |
| Features Bluetooth uses various profiles & protocols related khổng lồ faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here. | A2DP (Advanced Audio Distribution Profile) |
USB
The Universal Serial Bus (USB) is an industry standard that allows different electronic devices to exchange data.
| Connector type There are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device. | Micro USB |
| Version There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased. | 2.0 |
| Features Тhe USB interface in sản phẩm điện thoại devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc. | ChargingMass storageOn-The-Go |
Headphone jack
The headphone jack is an audio phone connector, a.k.a. an audio jaông chồng. The most widely used one in thiết bị di động devices is the 3.5 mm tai nghe jaông xã.
| Headphone jack Information whether the device is equipped with a 3.5 mm audio jaông chồng. | Yes |
Connectivity
Information about other important connectivity technologies supported by the devices.
| Connectivity Information about some of the most widely used connectivity technologies supported by the device. | Computer syncOTA syncTetheringHotKnot |
Browser
A web browser is a software application for accessing, fetching, displaying & navigating through information on the World Wide Web.
| Browser Information about some of the features và standards supported by the browser of the device. | HTMLHTML5CSS 3 |
Audio tệp tin formats/codecs
thiết bị di động devices support various audio tệp tin formats and codecs, which respectively store and code/decode digital audio data.
| Audio tệp tin formats/codecs List of some of the most comtháng audio file formats & codecs supported standardly by the device. | AAC (Advanced Audio Coding)AAC+ / aacPlus / HE-AAC v1AMR / AMR-NB / GSM-AMR (Adaptive Multi-Rate, .amr, .3ga)AMR-WB (Adaptive Multi-Rate Wideb&, .awb)eAAC+ / aacPlus v2 / HE-AAC v2FLAC (Free Lossless Audio Codec, .flac)MIDIMP3 (MPEG-2 Audio Layer II, .mp3)OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus)WMA (Windows Media Audio, .wma)WAV (Waveform Audio File Format, .wav, .wave) |
Video file formats/codecs
Mobile devices tư vấn various đoạn Clip tệp tin formats & codecs, which respectively store & code/decode digital Clip data.
| Video tệp tin formats/codecs List of some of the most comtháng Clip tệp tin formats and codecs supported standardly by the device. | 3GPP.. (3rd Generation Partnership Project, .3gp)AVI (Audio Video Interleaved, .avi)DivX (.avi, .divx, .mkv)Flash Video (.flv, .f4v, .f4p, .f4a, .f4b)H.263H.264 / MPEG-4 Part 10 / AVC videoMKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks)QuickTime (.mov, .qt)MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)WebMWMV (Windows Media Video, .wmv)Xvid |
Battery
The batteries of Mobile devices differ in capacity và technology. They provide the electrical charge needed for the functioning of the devices.
| Capacity The capađô thị of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours. | 3000 mAh (milliampere-hours) |
| Type The battery type is determined by its structure và more specifically, by the chemicals used in it. There are different battery types & some of the most commonly used in sản phẩm điện thoại devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer). | Li-Polymer |
| 2G talk time 2G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 2G cellular network. | 18 h (hours)1080 min (minutes)0.8 days |
| 2G stand-by time 2G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 2G cellular network. | 490 h (hours)29400 min (minutes)trăng tròn.4 days |
| 3G talk time 3G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 3G cellular network. | 10 h (hours)600 min (minutes)0.4 days |
| 3G stand-by time 3G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected khổng lồ the 3G sản phẩm điện thoại network. | 490 h (hours)29400 min (minutes)đôi mươi.4 days |
| Quiông chồng charge technology Quiông xã charge technologies differ in energy efficiency, power output, control over charging, temperatures, etc. The device, battery & charger must support one & the same charging giải pháp công nghệ khổng lồ achieve faster charging times. | MediaTek Pump Express Plus |
| Features Information about some additional features of the device"s battery. Chuyên mục: Tin Tức Mới nhất
|